Crowd control acrylic panel waist height turnstiles allows higher
pass throught traffic rate
SN-TY201 series provide a combination of reliable mechanical as
well as electronic retriction for unauthorized visitor while still
maintain a welcoming atmosphere. Access control and time attendance
reader can be integrated into flap barrier to improve accuracy of
SN-TY201 series is ideal indoor solution for railway platform,
passenger terminal, ferry, airports, checkpoints, factories,
stadium, lift lobby of commercial, industrial or government
building. Flap barrier give a more premium and organized entrance
to your building.
SN-TY201 series is an innovative pedestrian control technology that
designed to achieve best balance quality, performance and
1. Flap barrier support up to 0.5 sec opening / closing time. This
allow higher pass through traffic rate and effectively reduce long
queue in front of entrance/exit door during peak hour.
2. Flap will only close after all IR sensor confirmed that the
pedestrian has finished passing through.This ensure flap will not
crush onto a pedestrian.
3. During power failure, flap will automatically open by itself to
allow free passage for emergency escape. Flap will automatically
close back when power resume.
4. Intelligent sensor will auto reverse the flap if there is a
sudden incoming obstacle while the flap is closing. Flap will also
auto reverse if there is something blocking the flap to avoid motor
overload and damage itself.
5. Flap will auto close if there is no pedestrian passing through
after the delay time elapsed.This will avoid unauthorized user from
sneaking into the building when flap was opened wrongly. The delay
time can be preset in control panel.
6. Built in high sensitivity infrared photocell to detect
unauthorized and abnormal access. Alarm will sound and red light to
alert security guard. Flap shall remain securely locked if it did
not receive any authorized signal from access control system.
7. LED display at front and back can be set to display correct
passage direction once activated. This ensure pedestrian go into
the correct lane when multiple flap barrier is installed side by
side. Display can show “X” if no access is permitted.
AC220 ± 15V 50Hz
AC110 ± 15V 60Hz
Access device input voltage
Dry contact or 12V electrical level signal or > 100ms 12V
impulse signal or driving current > 10mA
DC 12V (brush motor)
Max flow rate
30 to 40 person per minute
Flap openning/closing time
Indoor/ outdoor with tent